CCNA study question. is enabling the device to allow user- or group-based access Authentication or Authorization?thanks
CCNA study question. is enabling the device to allow user- or group-based access Authentication or Authorization?thanks
Dear Community, i want to integrate DaloRadius with a switch, i have troubles authenticating. and after I set up the radius there won't be any ping between the radius server and the switch, this is what i applied on the switch:radius-server host 11.1...
Hello,Is there any version of Catalyt Center VM designed for Azure cloud?Is there any Cisco roadmap for this.If anyone can share any official cisco link with these information I'd appreciateThank you
I've been running into issues regarding ISSU upgrades using DNAC on the 9400/9500 series switches. For some context, I've been using DNAC for bulk switch upgrades and for the most part, all has been well. However, whenever it comes time to use the IS...
We have all of our devices safely snuggled into DNAC, provisioned and managed; however we have our ASR1000, and our 9400 series cores and distros plust all of our Access switches not appearing on the Assurance > Health page As you can see they show r...
Hello Gents, kindly can someone explain to me Lisp Pub/Sub and what its benefits rather than Lisp/BGP
I have a pair of FTD 3110 and a virtual FMC, not part of the fabric. I was wondering if it's worth adding it to DNAC. what can DNAC do with it? would DNAC push config change to the firewalls?
Hi all, Application visibility service, does not show any info on Cbar and NBar. when I provision, I get message that Application recognition service not installed go to software management. my issue is I don't have access to internet from the DNAC. ...
Hi,We are planning to have two geographically separated sites, but they will be connected to each via dark fiber,Site A has two border/control nodes and several edge nodes behind it, we have fusion routers connected to this border/control nodes which...
I have an unreachable device that I would like to delete from Inventory. I'm running DNA Center v1.2.8 (system 1.1.0.715). My attempts to remove the device from withing the application have failed. Maybe the solution resides in using an API call or s...
Dear Community,I have deployed DaloRadius which is free Radius server to a cisco switch now i can't login to the switch even from console,I tried to login with every user i made in my Radius server, but still it shows me: Authentication Failed. User...
Under DNAC Inventory, health score for all our devices, about 10 of them, are going on and off. they show 10 but after a while some of them show no health randomly, and then some of them change to 10 again and so on so forth. Ping to the devices seem...
We used DNAC GUI to generate CSR and signed the certificate using our internal CA. it looks like successful. however, on DNAC managed switches, I saw this error message, could anyone help me understand this message? %PKI-4-CRL_LDAP_QUERY: An attemp...
Hopefully someone can help me out hear.I am having Problem getting the Console Port to work correctly.The DNA is connected to a Avocent Terminal Server. The Problem is that it is not connecting correctly. I just see Lines.Does anyone have any Ideas.T...
Hello, i onboarded my switches with pnp nd everything worked fine. My Management VLAN is my onboarding vlan. I had to make some changes in my design network hierarchy so i deleted the devices an discovered them again and assigned them to the sites....
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-25-2024 07:56 AM | ||
04-24-2024 09:16 AM | ||
04-22-2024 03:36 PM | ||
04-19-2024 12:21 AM | ||
04-17-2024 04:30 AM |
User | Count |
---|---|
2 | |
2 | |
1 | |
1 | |
1 |