About Jerems

Jerems · 05-21-2024

Hi dear community,I have a good one for you regarding the setup of a vpls (ldp signaled) between a Cisco ISR1100X and a Juniper SRX300.As an example i am sending a simple ping between each node at each side of the VPLS.Both nodes are in Vlan 18 and h...

Jerems · 05-14-2024

Hi dear community,According to you, what is the best way to capture MPLS traffic flowing between two ISR ?Does EPC provide a way to do so from the router itself ?https://www.cisco.com/c/en/us/support/docs/ios-nx-os-software/ios-embedded-packet-captu...

Jerems · 01-20-2024

Hi Dear Community,Just wanted to share my experience with Python and Netbox Api to add automatically to my Netbox inventory on one hand a Cisco device running IOS-XE and on the other hand a Juniper SRX device running Junos.We generate two kinds of p...

Jerems · 07-11-2023

Hi Dear community,Can you please comment this design and tell me what could be wrong as the XCO prevent me from pinging each end devices in vlan 19.Thanks in advance for your help.Kind Regards,Jerems

Jerems · 06-07-2023

Hi dear community,Can you please help me in pointing out what's happening with both ISR1113 (installed at customer premises) and the CPU Cores 2 & 3:As a reminder, Cores 0 & 1 are dedicated to control plane, cores 2 & 3 are dedicated to data plane."s...

Jerems · 05-24-2024

Hi @Harold Ritter ,A continuons ping between both hosts at each side of the vpls stops to work once i enable the Control Word option on Juniper side. I should probably post somerhing on juniper community website

Jerems · 05-24-2024

As a reminder here is the config that does not work between Juniper and Cisco:You will need to delete this statement to let the VPLS working well.Regards,Jerems

Jerems · 05-24-2024

So i changed the config from each Cisco PE :From :interface pseudowire2122 encapsulation mpls signaling protocol ldp neighbor 10.0.0.22 212221 mtu 1500 control-word includeTo:interface pseudowire2122 encapsulation mpls signaling protocol ldp ...

Jerems · 05-23-2024

So....I launched another serie of test with two Cisco Router at each side of the VPLS service with Control Word Enabled and it works fine:For some reasons the sequence number is still at 0.I will disable the Control Word option on the pseudowire inte...

Jerems · 05-22-2024

You are right, i got it too fast probably. Need to investigate **rther more.

Member Since	‎06-28-2021 06:44 AM
Date Last Visited	‎05-28-2024 01:29 AM
Posts	128
Total Helpful Votes Received	102

User Statistics

User Activity

L2VPN - VPLS between Cisco & Juniper with Control Word enabled

How to capture ethernet Frames with Ethertype 0x8847 & 0x8848 on ISR

Junos & Ios-XE Netbox Rest API Python Script Network Automation

L2VPN Cisco & Juniper : VPLS OK // XCO NOK

High CPU utilization on ISR1113

Re: L2VPN - VPLS between Cisco & Juniper with Control Word enabled

Re: L2VPN - VPLS between Cisco & Juniper with Control Word enabled

Re: L2VPN - VPLS between Cisco & Juniper with Control Word enabled

Re: L2VPN - VPLS between Cisco & Juniper with Control Word enabled

Re: L2VPN - VPLS between Cisco & Juniper with Control Word enabled