Tools

Dear YDK usersThe new YDK release 0.9.0.1 is coming soon. It includes the following features:Upgrade to pyang-2.4.Upgrade Libyang YDK fork to the latest version in order to support YANG1.1.YDK support for new and extended YANG features based on rfc-7...

Hi all I have a small script that collects information from a list of devices, but it takes a long time. I have found out that there is a disconnection time of 10s I think I am hitting. I have found the documentation that says I can change the settin...

Afternoon everyone, I'm trying to connect to an APIC using PyATS and the rest.connector.Rest method, but no matter what, I get authentication failures. Here is my testbed file:devices: apic: os: apic type: apic custom: abs...

Hello,I need help to recover the cli prompt> after a Dialog conversation:Since PyATS Junos does not have support for linux shell# access, I am using the Dialog conversation to accomplish sending commands in shell mode1- From cli> enter shell with 'ex...

got no module error, but when I looked master that it seems trex_subinterface_stats.py is no longer exists in latest master was it replaced by new functions?   linux-host0:/opt/trex/DevX-TRex-v23.11-v3.03-34/automation/trex_control_plane/interactive/...

would appreciate to see an example using Trex to simulate traffic that can scale up mac-address table on DUT(switch).   thanks 

Hello,I'm building a small python script using pyATS library and I would like to verify if the configuration commands are valid (command syntax and mistype) before sending it to the device, so I don't send half the configuration to the device. Is the...

Hi, When I start trex manually, via: cd /opt/trex/DevX-TRex-v23.05-v2.99-63 & ./t-rex-64 -i it runs in a stable state. However once I run pyats run job, TRex crashes with: ./t-rex-64: line 106: 184608 Segmentation fault      (core dumped) ./_$(basen...

Hello, I discovered genie parser and it's awesome.I installed pyats[library] + genie + pyats-genie-command-parse 1.3.9 on ubuntu 20.04I use it on .txt files as explained at the url :https://community.cisco.com/t5/controllers/use-genie-parser-on-text-...

Hi,Running this query results in a timeout. I queried with or without neighbor element, however, results are the same. Any workaround to not time out? Route scale is about 12K routes inside the VRF table.Neighbors Configured: 6 Established: 5Address-...

I have a cisco Cisco IOS XE Software, Version 17.03.05 on cisco ASR1001-HX (1SR) processorI am running this simple netconf yang code to get the runninmg config import xmltodictimport xml.dom.minidomfrom ncclient import manager router = {'ip': '192.11...

I have been able to use this yang model to get a lot information about AP: https://wlc_ip/restconf/data/Cisco-IOS-XE-wireless-access-point-oper:access-point-oper-dataBut that YANG model does not have any information about APs that goes down, and fall...