Routing

I have ASR 9001 and OS is asr9k-os-mbi-6.1.1.04I/0x100000/mbiasr9k-rp.vm.I am try to configure BRAS but some commands line are not showing like: BNG command global and on interfaceBBA group, Need suggestion and help Thanks 

Our gateway mac address is different when we give arp -a in cmd the mac address is another show when we trace it shows a student mac what could be the problem?

Hi everyone,I have 2 Aruba GWs and 2 L3 cisco switches with their respective VLANs and Network subnets.Both GWs are active and each cisco forwards traffic to it's respective GW.I want to achieve a dynamic traffic failover (ospf) if one of the GWs wou...

Hello all, I need your help to come up with a solution.A user is connected remotely to host location via flex Anyconnect remote vpn(vpn pool - 172.17.1.1 to 172.17.1.40). And also, there is a site to site VPN between the host location(192.168.1.0/24)...

If I have Site A and Site B:Site A has Border switch that sending prefixes over eBGP peering and multiple eBGP peerings for separate VRFs to the Cisco Routers and that Cisco Router connected via dark fiber with Site B FW (lets say palo alto)What will...

hello Experts,Please help me regarding VTP Server config on 3560E.I have configure multiple vlans on both the core swithces below is the example, my question is how will be my VTP server configuration on the 3560E since both the core switches will ha...

Hey!I'm trying to add a NAT rule to my ISR 4321 (Cisco IOS XE Software, Version 17.03.05) for an IPSec VPN running on an ASA 5515-X, but I am receiving the following message. I'm not running IPSec on the ISR as far as I'm aware. Any ideas? isr4321(co...

Hello everyone,  Could anyone explain me, please, about the difference between Egress and Ingress PCC. While reading RFC about the PCEP protocol can't catch the real meaning of these two terminologies.  Thank you in advance!

I don't deploy multicast often so I wanted to ask about MC configs as a sanity check. I have two Palo FWs each with a layer3 interface/gateway for separate servers.   The FWs are two L3 hops away from each other.  There are two L3 Catalyst 9300 switc...

Hello,,,We have Cisco ISR 4461 with isr4400v2-universalk9.17.06.03a.SPA.bin ISO image, we need to implement the SSL VPN feature so we find that we need to upgrade to Cupertino-17.7.1a ISO.https://software.cisco.com/download/home/286320564/type/282046...

Found some old antique 5505 and 5510 (NOT X) running 8.2.5.What is the upgrade path in 2024?Back in 2014 it was going to an 8.4.x code then up to a 9.x.x level of code. 

Good afternoon:Run a simulation in packet tracer to implement a router on stick with two vlans. The simulation worked without problems, and I want to implement the same on my cisco 867VAE router.This equipment has a Giga interface for WAN (Ge1), and ...