Unified Computing System Discussions

Hi Experts, Due to customer’s application requirement in a project, need to run SUSE Linux 11 SP1 in B420 M3 (we currently using UCSM 2.2.3), however, while installing SUSE 11 SP1 it can not find hard drives and installation failed. We use 300G SAS H...

Hello, We have a ACI fabric running 1.1.1o. We have a FEX connected and applied a link policy for the 102/1/41-48 to be fixed 100Mb. Most ports are in use as you can see in the output below.  LEAF2# show interface ethernet 102/1/41-58 brief ---------...

Hello All,I am new to this technology & facing a peculiar issue with the UCS blade networking.Two UCS B200 M3 blades are configured as ESXi hosts. Static IPs have been configured.Both the blades are able to connect to the external network but they ar...

In Case of Dual active or Split brain what actually causes data plane to break. As end device already have Ip resolved either to Virtaul or Physical mac address. Shouldn't existing flows continue even when we have both vPC peer active.Its theres stat...

Most of the white papers covering AD Integration of UCS don't use SSL; transporting clear text passwords over the network is not state of the art. Are there any white papers, which cover AD Integration of UCS with SSL ?

I am running UCS emulator 3.0 with 4 gig of ram and 2 cpus.When I open UCS Emulator in firefox or  chrome the left hand menu shows up fine but the middle/left pane is blank, no launch buttons show up.I am running java 1.6.Any ideas?

High Experts, Please let me know which UCS rack server is best to accomodate both ESAv, WSAv and SMAv virtual appliances. Thanks & Regards,Rahil

While creating PEER link for a VPC  is it must to have peer switches  back to back connected or there can be a extended layer 2 connectivity over multiple layer 2 devices in between . If so is there any limitation on number of devices in between.

We have a UCS5108AC chassis with 2 2104XP I/O modules and 1 B200 M1 Server.  We recently purchased 2 UCSB-PSU-2500ACDV power supplies.  We are wanting to use the 110v capability off of the new power supplies.  My question is will this work.  The only...

I've got C220 M4 server with two 1Gb Intel LOM adapters which I configured for iSCSI boot. I got boot from SAN working but only on one adapter at the time, secondary adapter is not active and stays that way even if I shut down the primary adapter. Is...

Hi, I hope somebody can help me with this. I've had this server powered down for about two months and it was working fine. I powered it on to install VMware ESXi 5.5 or 6. When I checked the RAID controller there were not any virtual drives created w...

Hi all,I tried to configure my UCS System with a Service Profile template.I Use iscsi boot, so I Need to configure a UcsVnicIScsiStaticTargetIf via CiscoUCSPS.It took me a Long time to find out the Syntax with try and error and the | convertto-ucscmd...