Activity in Unified Computing System (UCS)
Cisco UCS B200-M4 "Service profile SP-Blade2 ..flexflash-card"
Hello Bro, Recently I was making changes to Cisco UCS server B200-M4, I have changed the management IP "IP pool, and Fabric IPs'".Everything went Ok, and ended up with error log "Service profile SP-Blade2 configuration failed due to power-...
Vmware custom ISO post broadcom
I was digging through the Broadcom support to see if I could find the latest custom ESXi iso and it seems like several vendors showed up but Cisco did not... Any reason for this that anyone knows? And does anyone happen to have the latest ESXi custo...
Resolved! Disk Problems - Can we recover? (UCS C240 M4SX)
We have a UCS C240 M4SX that is out of coverage now (no contract) though the plan is to replace this with a new server, but for now we're stuck with it. The problem is, virtual disk 0 is down because we have 2 disks (1 and 2) that were in a predicted...
UCSC-C240-M5SN upgrading firmware from 4.2 to 4.3, Utility never loads
Trying to upgrade a UCSC-C240-M5SN firmware from 4.2 to 4.3. I am using a vKVM mounting the ISO, have done over 4 others without issue, this one will mount the ISO, reboot let me choose it as a boot option, load the drivers, then right before it shou...
Resolved! N20-C6508 UCS 5108 Blade Svr AC Chassis/0 PSU/8 fans/0 fabric e
I have Cisco UCS 5108 and trying to install Cisco UCS 6324 Fabric Interconnect for the configuration purposes. I can't boot it normally. it's give ma message of non-supported.
Cisco Compute Hyperconverged with Nutanix Standalone Field Guide
A Field Guide covering the installation and initial configuration of Cisco Compute Hyperconverged with Nutanix systems using Standalone Cisco UCS C-Series servers managed by Cisco Intersight. This guide is intended for technical training and educatio...
Will configuring unused port on Fabric add adapters for vNICs?
I'm absolutely new to UCS and I've inherited a system that is discontinued and out of support. I've been tasked with moving 40TB of data off this UCS/vSphere system and onto a newer system supported by our server team. (Server team is unfamiliar with...
5 IOM replaced via RMA in 6 month...
IOMDCDateIOM 6/1 (A)A10.nov.2023IOM 3/1 (A)B09.jan.2024IOM 4/2 (B)A12.feb.2024IOM 6/2 (B)A21.feb.2024IOM 6/1 (A)A16.apr.2024Hello do you have any ideas about raisons what could cause multiple hardware IOM failure?Hardware is new, firmware are up to d...
UCS Spec for Cisco Molding Labs 2.7
Hi There I'm looking for a UCS Spec for Cisco Molding Labs 2.7 for 60 students to work simultaneously. looked for days but could not find the spec for my requirement. Any help is apricated Thank you
UCS B200 M4 server wont entirely boot
upon receiving power, it does in standby for a bit, before the blade health LED flashes green, and then the power button turns green, and it says that it is testing memory, before going back to standby, with a solid amber blade health LED. The RAM is...
UCS API using Redfish to change Timezone
Hi together I try to configure the UCS timezone via the Redfish API, the only thing that I found so fare was: Changing "DateTimeLocalOffset", this works so far to change the utc / localtime. but not the correct timezone. Did anybody manage to set th...
upgrade UCS and windows operating system driver question
we want to upgrade ucs to new version 4.x.x Does I need upgrade windows server driver ,I found Cisco provide iso driver according to new Ucs version. we have windows server 2012 But I search Cisco ucs compatible matrix web site I found according to ...
Adding a Physical NIC to UCS/VM
Overall Objective:Need to make physical nic on rackmount Cisco UCSC -C220-M5SX available and assign to VM (Windows Server 2019) residing on a Cisco USCB-B200-M5 that exists in a Cisco Chassis that is connected through a Fabric Interconnect. Cisco UC...
Drives offline
Hello all,Maybe this question was published before but i was unable to find an answer that solvedy issue.I acquired an UCS C240 M4 recently with firmware version 2.0.I upgraded to version 4.2 without problem.Since I had no access to the CIMP web int...
Changing IP pools for Cisco ucs 5108
Hello Bros'I have a question regarding Cisco UCS system with specs as mentioned below:UCS manager 3.1(3b)Chassis 5108Ucs FI 6248upIO module 2208xpDue to creticality I wanted to consult you regarding changing the IP addressing used in the management a...
