I'm unable to upgrade IM&P from 12.5.1.10000-22 to 14SU1. I was successful in running the cop file. When I attempt to upgrade the file, I receive an invalid upgrade path. I need advise how to fix this issue.Available options and upgrades in1) ciscocm...
Forum Posts
Hi Guys, I want to change the current CM and IM IP address to another subnet. To simulate of what I will do, I built a test environment. After the IP address change, the IM servers looked fine. The dbreplication status was 2. But CM servers got diffe...
Hello,Is there a way to just export the devices who doesn't have any route partition selected.We have around 8k devices in our cucm and i am trying to figure out a way to just export those which doesn't have any Route_Partition selected. Thanks
Issue Description: There is dbreplication issue between CUCM Pub and Sub. CUCM version is 9.1. Investigation:Output of "utils dbreplication runtimestate" shows (3) PUB Setup Completed and (?)Setup Completed. Publisher is connected and Subscriber is O...
Resolved! Voice mail not work on cisco jabber
Hello all, I hope you are doing well, I have a cucm 11.5 integrated with Im&Presence all work fine but i have a user account with jabber and voicemail , the problem that i have when i connect that user in cisco jabber desktop i can't use voice mail...
Hello all;I hope you are doing well. I have a problem on replication database not setup on cisco unity connection 10.5 , when i put the commands utils dbreplication runtimestate , i get this :Best regards
the end customer wants to migrate the network from IPv4 to IPv6, I know that CUCM can be configured with dual stack, but we can configure the DNS servers with IPv6 on CUCM??? I mean can I input an IP addr V6 with this command:
Hi Experts,We have recently installed CUCM 9.1.2/IM & Presence 9.1.1 and tried to upgrade to 11.5 in our lab. Upgrade was successful for CUCM and IM & Presence to 11.5.1.13900-52 and 11.5.1.13900-57 respectively.After upgrade I am able to login to CU...
Hi,has someone an idea if and when WebRTC will be usable with CUCM registered endpoints?
Hi, After upgrading CUCM cluster from version 11.5 to 12.5 and Unity Connection, the RTMT has stopped working port monitor functionality. In addition, a Unity subscriber has been added when before there was only one machine. It has been tested with t...
Hello, since Endpoint software version 9.12 the webex codec pro supports more then 3 cameras.Is this a software only based feature so i can update my codec (before 04/2020) or is this a hardware based feature? Thanks for your help
I'm trying to install Expressway and I'm receiving this error at the end of the boot process. Cisco expressway starting vmtoolsd no value found. I cannot get to the Web interface, but can ping it. When I log into the VM console I see 4 alarms, which...
HelloI’m designing a solution to a customer and I need assist with one of the component.The customer has multiple remote sites, each site located in a different country, all of the endpoints are registered to the main site UCM on HQ.Each site has ISR...
I have a list of DID's I need to check on who owns them. There are two firms and I need to figure out who own them. Currently I have checked on the assigned and unassigned DN's to see if any falls in the ranges via CUCM. Unfortunately none correlates...
Hello team, I hope I described my question as well as possible (writing and drawing) so it would receive a Yes/No answer I already verified this parameter in CUC: It is checked:Use Last (Rather than First) Redirecting Number for Routing Incoming Call...
