Resolved! Core switch suggestion
any core switch ip base latest model suggestion for a 80-100 users that is also affordable? also configurable via CLI.
Forum Posts
Now we are on an organization with cisco SWs and core sw, we have many links connected to that sw, 7 links, its an 8 core sw and we need ports thats why we want to buy another bigger core sw
I have 9200 switch with TtenGigabitEthernet Transceiver Module. Connected through (not sure but will confirm tomorrow) WDM to another switch. sh inventoryNAME: "c92xxL Stack", DESCR: "c92xxL Stack"PID: C9200L-24T-4X , VID: V01 , SN: XXXXXXXXXXX NAME:...
Hi, we have configured nexus 9k switch and connect directly with DELL EMC unity 300, we are unable to ping connectivity, also configuration below mentioned. vlan 101 interface vlan 101 ip address 10.0.0.1 255.0.0.0 no shut interface ethernet 1/1 s...
We have CTS deployed across our network and are using a mix of C3850's and 9300 switches. All the 3850's appear to be functioning fine.However some of the 9300's (all provisioned with the same template from DNA-C) are going to error disabled when CTS...
Can we use BPDU guard and BPDU filter command on same switch port along with port-fast as BPDU guard error-disables the port and BPDU filter drops the incoming BPDUs on port so here two action would happen simultaneouslyplease explain.
Is it possible to achieve a redundancy over different types of links that both advertise the same subnet over OSPF?Would either of the configurations above work? Either the router and firewall are connected to the switch or the firewall is connecte...
C9200L-48PXG-2Y48 ports full POE+ (8 mGig ports up to 10G, 40 ports up to 1G)2x 1/10/25G fixed uplinksPWR-C5-1KWACFixed redundantFrom this spec, I think that this switch will come with full POE+, 40 ports of 1G, and 8 ports of 10G. For the fixed upli...
Recently we have been warn by our security team for a SSH vulnerability been detected on our Cisco devices (Cisco catalyst 2960, 3560) using McAfee Foundstone.Our ssh version is 2.0 and we did change the RSA key to 2048 but then the result still the ...
I am looking to buy a few POE 48 port switches and I have narrowed it down to either - Cisco CBS250, Managed, L3, Gigabit Ethernet (10/100/1000), Power over Ethernet (PoE), Rack mounting, 1U CBS250-48P-4X-UK or Cisco Small Business SG220-50P, Manage...
Resolved! Network Support
C9200L-48P-4X48 ports full PoE+4x 1/10G fixed uplinksPWR-C5-1KWACFixed redundantI'm trying to order a 9200 Catalyst switch. By looking at the spec above, My understanding that this switch will come with 48 copper ports full PoE+ and 1G speed on each ...
I have a 9300 stack with 2 switches i've already configured call home but in portal i can see that only one license is in used. Msg Subtype Success Failed Inqueue Dropped Last-sent (GMT-02:00)---------------------------------------------------------...
switchport port-security aging time 2switchport port-security aging type inactivitywhat is the effect of this command on switch?
I am planning for upgrading 4507R-Sup7 in SSO mode with 2 modules.Current version >> 03.04.03.SGPlanning version >> 03.11.05EWhen checked the rommon version, it is belowM Hw Fw Sw Status--+--------------------------------+---+------------+-----------...
I'm trying to configure a SPAN port in 9300 switch but the interface is up but line protocol downthis is the configuration Switch(config)#monitor session 1 source VLAN 1Switch(config)#monitor session 1 destination interface GigabitEthernet2/0/15this ...
