Do you know how to display via SNMP if PortFast is configured on a given port?Is this even possible?We are building an application that is supposed to work optimally so we are testing simple port configurations via SNMP such as setting VLANs, IPs, ma...
If a frame with a tag corresponding to the native VLAN enters the trunk port, will the switch take down that frame and send it on over the trunk link as untagged, or will it send it with a tag corresponding to the native VLAN?How I understand it:(Let...
At first I thought that blocking outbound traffic from the VTY line was to block outbound sessions from a particular router. However, I recalled that traffic generated from a device is not filtered by the ACLs on that device.I have read that this con...
Hi, I am wondering why port-channel 3 works when I have 'access' at one end of Po3 and 'trunk' at the other end of Po3.---Switch2---interface Port-channel3switchport mode access!interface FastEthernet0/23switchport mode accesschannel-group 3 mode pa...
Thanks for the clarification. I always looked at the MAC address as something globally and locally unique.Thanks for helping to clear up my doubts and providing me with other knowledge in the process.
Thanks for this comment, it is really helpful.Forgive my clinging, however, I would like to make another inquiry about something.“Switch2 receives the VLAN 20 tagged frame on e1, pops the VLAN tag, and writes VLAN 20 into the frame's metadata. Switch...
I would like to add a question so as to clarify your answer.I am mainly concerned with the situation in the photo below. Where the frame between switch 1 and 2 (native VLAN 33) will go with tag 20. However, I would like to make sure that between swit...
