Solved: Re: catalyst 9800

susim · ‎05-31-2022

Hi,

In catalyst 9800 can I add mix of 3702i and cat 9130AX

Thanks

Leo Laohoo · ‎05-31-2022

Yes

View solution in original post

Leo Laohoo · ‎05-31-2022

Yes

balaji.bandi · ‎05-31-2022

As mentioned @Leo Laohoo yes for your question, i was thinking bit beyond - Is this Fabirc enabled WLC ? or OTT (capwap) ? (there is some Limiration in terms of Fabirc (not able to find the document to post here).

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

Rich R · ‎06-01-2022

And remember the last release which supports 3700 is 17.3

------------------------------
Please click Helpful if this post helped you and Select as Solution (drop down menu at top right of this reply) if this answered your query.
------------------------------
TAC recommended codes for AireOS WLC's and TAC recommended codes for 9800 WLC's
Best Practices for AireOS WLC's, Best Practices for 9800 WLC's and Cisco Wireless compatibility matrix
Check your 9800 WLC config with Wireless Config Analyzer using "show tech wireless" output or "config paging disable" then "show run-config" output on AireOS and use Wireless Debug Analyzer to analyze your WLC client debugs
Field Notice: FN63942 APs and WLCs Fail to Create CAPWAP Connections Due to Certificate Expiration
Field Notice: FN72424 Later Versions of WiFi 6 APs Fail to Join WLC - Software Upgrade Required
Field Notice: FN72524 IOS APs stuck in downloading state after 4 Dec 2022 due to Certificate Expired
- Fixed in 8.10.190.0, latest 9800 releases, 8.5.182.11 (8.5 mainline) and 8.5.182.108 (8.5 IRCM)
Field Notice: FN70479 AP Fails to Join or Joins with 1 Radio due to Country Mismatch, RMA needed
How to avoid boot loop due to corrupted image on Wave 2 and Catalyst 11ax Access Points (CSCvx32806)
Field Notice: FN74035 - Wave2 APs DFS May Not Detect Radar After Channel Availability Check Time
Leo's list of bugs affecting 2800/3800/4800/1560 APs