Hello, I would like to modify the management VLAN of my 2702 Cisco AP without modifying the Native VLAN. We are using a Centralized WLC to manage our APs, with AP groups and Flexconnect groups. I managed to change the AP management VLAN by modifying ...
Hi We have c9800 wlc. and we would like to setup wlan with psk. We are not sure if the psk works with MSCHAPv2. Anyone share some experience? Thank you
Dear Community I have noticed that all wlans I create on my wlc 5508 are active for the default group.That leads to issues with the ap deployment. The accesspoints are mounted by electricians and until they are configured they offer all wlans. Other ...
Hi All,Issue: Looking at upgrading 3 x 9800-40 SSO controllers from 17.3.3 to 17.3.4c via DNAC Version 2.2.2.5.Uploaded C9800-40-universalk9_wlc.17.03.04c.SPA.bin into DNAC gold image repository. All good apart from the upgrade readiness report fails...
This question relates to a network of 9130 APs, managed by a 9800 WLC. I'm trying to reduce the number of SSIDs being used in the network. One of the reasons for having so many SSIDs is that there are several communities of wireless IoT devices that...
Greetings! We are happy to announce the first refresh of 8.10 MR8 Beta Program for PRODUCTION deployments. This release is the first qualified EFT/Beta Image and it is both TAC and BU supported. After a successful 8.10MR7 CCO, this program is focused...
Hi, I have a Catalyst 9800-CL in a test environement with three 9120 APs in Flex mode. I habe enabled "wireless mgmt-via-wireless". But when I am connected over wireless with a client that is connected in the same vlan as the controller I can´t acces...
I am looking to implement interface groups in our wireless environments. We are currently running into issues with exhausting our DHCP pools and are looking to establish a second interface on one interface. I have a few questions in regards to this f...
Hi All, I am getting a continuous stream of messages like the ones below on my 5508 WLC: *webauthRedirect: Feb 11 15:08:47.373: %EMWEB-6-PARSE_ERROR: webauth_redirect.c:2222 parser exited. client mac= b4:cd:27:d0:19:6c bytes parsed = 0 and bytes read...
I DID NOT GET ANY FIRMWARE OF AIRLAP 1200 SERIES . CAN I GET THE AIRLAP 1242 FIRMARE SO THAT I CAN CONFIGURE
I'm in the process of creating a wireless management VLAN for our APs, and so am re-IP'ing the access points. Currently they're in VLAN 1 alongside the clients of one of the WLAN's, so I'm putting them into VLAN 109. However when I do so on a test AP...
I have a bunch of these messages in my log on my 3850 switch. How should I troubleshoot this? *Aug 10 09:20:40.141: *%SOCKET-2-SOCK_RECV_ERR:Switch 1 R0/0: wcm: Error parsing from CAPWAP socket*Aug 10 09:20:45.327: *%SOCKET-2-SOCK_RECV_ERR:Switch 1 ...
Hi guys, My deployment consists of WLC 5520, 8.5.171 software, running 20MHz channel width with mix of 2700i/2800i APs.Right now I am using UNII-1 and UNII-2 channels, having totally available 8 channels for approx. 70 access points in 7-floor buildi...
I try to put new image from 8.5.135.0 to 8.10.171.0 on AP but for 4 AP of 86 I couldn't. Here is log from AP UK-AP07#Jun 16 14:35:42 kernel: [*06/16/2022 14:35:13.6832] ....Re-Tx Count=1, Max Re-Tx Value=8, SendSeqNum=32, NumofPendingMsgs=2Jun 16 14:...
In the course of studying the generated events in Cisco PI for Rogue AP, it turned out that there is no working link to the map of location of access points.Can you tell me how to fix this? Does this functionality require any additional license?
