About akshaycjoshi

akshaycjoshi · 04-05-2024

I have 3 C8KV devices in my LAB topologyTwo of them have been able to form control connections with all controllers.One can form control connections with vmanage and vbond but not vsmart. SITE33#show sdwan control connectionsvbond dtls vmanage dtls S...

akshaycjoshi · 03-27-2024

In my topology, I have my vmanage connected to a cisco router, where the router acts like a VPN server.There is a windows machine too which is able to receive the updates from the NTP server and also accept its. However, my vmanage, receives the upda...

akshaycjoshi · 03-09-2024

CORE_ROUTER#whoLine User Host(s) Idle Location* 0 con 0 idle 00:00:002 vty 0 admin idle 1w0d 10.28.25.643 vty 1 admin idle 1w0d 171.70.127.664 vty 2 admin idle 1w0d 171.70.42.445 vty 3 admin idle 1w6d 171.70.42.446 vty 4 admin idle 1w0d 171.69.181.90...

akshaycjoshi · 02-16-2024

2 interfaces on C8200-1N-4T:GigabitEthernet0/0/0GigabitEthernet0/0/1need to form a port channel with 2 interfaces on C9500-16X:Te1/0/1Te1/0/2 On the router side, it has to be L3 port channel and on the switch side it has to be L2.Can someone please h...

akshaycjoshi · 08-04-2023

I have 7 interfaces 2 in VRF 120, 2 in VRF 140 and 2 in VRF 160 and 1 in global VRF configs: interface TenGigabitEthernet0/1/0ip address 100.100.100.1 255.255.255.0ipv6 address 2012:A2::8/64!interface TenGigabitEthernet0/1/2vrf forwarding 120ip addr...

akshaycjoshi · 04-06-2024

Its funny that the solution was vmanage reload

akshaycjoshi · 02-19-2024

THIS QUESTION IS STILL NOT ANSWERED. Please let me know if someone can answer it.

akshaycjoshi · 02-16-2024

Thanks MHM for your reply. I have already given the interface names, can you please provide me the final config.

akshaycjoshi · 02-16-2024

Router(config)# interface GigabitEthernet0/0/0Router(config-if)# no shutdownRouter(config-if)# no negotiation autoRouter(config-if)# channel-group 1 mode activeRouter(config-if)# lacp rate fastRouter(config-if)# exitRouter(config)# interface GigabitE...

akshaycjoshi · 02-16-2024

I want to add here that the router is in controller mode

Member Since	‎07-03-2011 10:21 PM
Date Last Visited	‎04-12-2024 12:48 AM
Posts	51
Total Helpful Votes Received	2

User Statistics

User Activity

C8000V not forming control connections with VSMART

My vmanage "rejects" the NTP update received

VTY timeout

Port channel between C8200-1N-4T and

route leak between custom vrfs and global VRF

Re: C8000V not forming control connections with VSMART

Re: Port channel between C8200-1N-4T and

Re: Port channel between C8200-1N-4T and

Re: Port channel between C8200-1N-4T and

Re: Port channel between C8200-1N-4T and