About Radim Smehlik

Radim Smehlik · 10-13-2021

Hello. Our network consists of several SG350X switches, that are 802.1x with DVA (NPS) enabled. All switches are runnning 2.5.8.12 firmware. We are also using Guest VLAN feature. This feature works well except one switch. That switch acts as a root s...

Radim Smehlik · 10-28-2021

You need to allow other vlans to access the switch management interface.Select Display mode Advanced, and then configure it in the menu Security -> Mgmt Access Method.Anyway recommended method (for security reasons) is to allow only one vlan to manag...

Radim Smehlik · 10-25-2021

As I am still trying to figure out my problem, I found a similar topic with a Cisco support response. Looks like disabling ip routing does not disable L3 mode. So probably my only option is to remove the ip configuration for the guest vlan (located o...

Radim Smehlik · 10-22-2021

Maybe somebody else can give you better advice, but I think you have to choose from two options that i wrote earlier. Anyway good luck!

Radim Smehlik · 10-22-2021

Try to disable IP routing on the switch and configure computer in vlan 1 with default gateway 192.168.1.1 and computer in vlan 100 with default gateway 192.168.100.1.

Radim Smehlik · 10-21-2021

There are two options how to solve your problem:connect your switch to your router by a trunk line and let your router to route between vlansdeploy router on a stick solution and let your switch to route between vlans Option 1 Disable ip routing on y...

Member Since	‎10-13-2021 01:25 AM
Date Last Visited	‎07-20-2022 12:01 AM
Posts	8
Total Helpful Votes Received	5

User Statistics

User Activity

Guest VLAN problem on one of several SG350X switches

Re: I cant acces switch sg350X from another Vlan.

Re: Guest VLAN problem on one of several SG350X switches

Re: Routing inter VLAN

Re: Routing inter VLAN

Re: Routing inter VLAN