UCS C200 M3 and server 2012 (hyper-v)

[thiagobeier]

Hi guys, we have a UCB C200 M3 and server 2012 + hyper-v 3.0 failover cluster

we set up a simple topology where we have on its servers (2012) 02 nics (one for hyper-v hosts and other for VM´s virtual switch

when we restart the servers for updates or maintainance the virtual switch (that comes from the UCS with  SRIOV + cisco according to this guide

http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/vm_fex/hyperv/gui/config_guide/2.1/b_GUI_Hyper-V_VM-FEX_UCSM_Configuration_Guide_chapter_0100.pdf

what can I do to test its environment?

regards,

Thiago

[richbarb]

Hi Thiago,

Let the SRIOV enabled in the virtual switch, virtual machine adapter and in your service profile just like the configuration guide.

The VM-FEX option under virtual swith configuration must be enabled if you will use vm-fex in your virtual machines, if not, enable and left the option cleared.

Go ahead, you are in the right path.