Inherited a UCS/HX environment and some LAN/VLAN configuration confused me and would hope someone could help clarify here: 1. The UCS domain contains two HX Clusters (prod and test). There are VLAN 100-200 configured in UCS as Dual Fabric mode and th...
I am having issues getting ubuntu 16.0.4TLS-server-i386 to recognize my local drives. I have also had this same issue when trying to install the cisco UCS version of ESXi onto this server as well.... both os installs show that no local drives are det...
I was doing a UCSM upgrade from 4.1 to 4.2 and during the process of rebooting the subordinate, I encountered an all paths down issues on some of my hosts. Why would this happen I have done this upgrade proceure many times using firmware auto instal...
Hello, I am very new to Cisco UCS and have just purchased a refurbished UCS C220 M3 server that I am trying to set up for the first time. I am trying to install VMware ESXi v7 onto it. However, I have read that the raid controller must be configur...
[Edit: 2021.09.17 Using @Steven Tardy 's comprehensive answer, I was able to update the script to run properly. You can read about it on my blog (Sorry - can't paste the link here - against the rules, but a search forrednectar hyperflex hx_post_inst...
I would like to start off by saying I am brand new to UCS, however, I am interested in expanding my knowledge with the platform, so please feel free to let me know if more details are needed. To do this I had just purchased a refurb UCS C220 M3 serve...
I'm on a team building an iSCSI boot solution for a UCS B-Series server, using a Pure Storage Array to boot both ESXi and Windows. The UCS servers are connected to an ACI fabric and the servers can reach the Pure Array. The ESXi boot lun (1) is seen...
Hello EveryoneI am getting an error stating our flexflash is unhealthy after firmware upgrade. Says it is running old firmware. I did not even know we had flexflash on our systems and do not see away to upgrade the firmware. I read that you are su...
Hi Guys I m trying to update from ESXi 6.7 TO ESXi 7.0.1 on cisco UCS C220 M3 , but didnt found disks , pls find attachment thanks
Hello, I recently bought a ucs c220, installed server 2016, the ip address for the remote access is in the same network as with other computers. The problem is when I launch the kvm i get the following error. please see attached. Im using java vers...
I did reboot after firmware upgrade but server is failed boot.The OS is not installed yet.When you turn on the "Configuring and testing memory .... Configuring platform hardware ....." screen will have to wait for 20 minutes after.1. power on2. The k...
Hello fellow experts, I'm in the process of configuring smart call home for our environment and have run into a problem where our SMTP relay servers used for notifications have been decommissioned, so I've been instructed to use the HTTPS protocol as...
Hello all, Hoping someone in this community can offer advice on memory configuration options for UCSB-B200-M4. I have UCSB-B200-M4’s with Intel Xeon E5-2683 v3 CPUs (UCS-CPU-E52683D) currently populated with 8 x 32GB (UCS-ML-1X324RU-A) modules provid...
Hello - Probably a pretty easy question here - I'm pretty green when it comes to managing our FI, and my question is on network interruptions and outages when it comes to modifying a network policy. All I need to do is assign an additional VLAN to ...
Hi, I am hoping someone can point me to a more detailed document regarding the HX Healthcheck results/outputs. For example, 1. One of the check return result status as "Lenient". It is easier to understand "PASS" or "FAIL" but what does "Lenient" ind...
