Hola buena tarde. Alguien me podría proporcionar un manual o tutorial de esta solución (Meraki MX84). Desde como configurar desde cero y puesta a punto. Saludos y gracias.
Forum Posts
Hello. When I run: #debug tftp events TFTP Event debugging is on #debug tftp packets TFTP Packet debugging is on #debug ip dhcp server packet DHCP server packet debugging is on. #debug ip dhcp server events DHCP server event debugging is on. #deb...
Hello all, Sorry by advance if this is a silly question... Let's imagine: An ACL which drop some ingress traffic is applied to a Vlan interface on a switch. Client laptop within this VLAN are connected to the same switch, but the SVI IP address ...
Hi Team , We have a requirement where we need to increase the file transfer speed between two desktops Both PCS are connected to Cisco 3850 switch(on diff Vlans) operating in l3 mode. It is shared networking and we are copying file from one P...
i configured Tacacs on my voice router gateway but can't perform ssh and console as expected.not sure if my configuration missing.when ssh - connection is refusedwhen console - it said %authentication failed and blank screen
I have an interesting issue that I am struggling to get my head around I have an EMC Array that has 4 Management ports that are connected to a 7K - we need to upgrade the Array's firmware but one of the pre upgrade checks is for a check on errors on...
Hi,Is there any chance to use Root guard feature on trunk ports in any kind of environment in cisco world.I have seen in one config, they applied root guard on trunk port. generally root guard feature is used for avoiding accidental situations or t...
Hi there,We have a basic corporate internet connection (100mbit/s down, 10mbit/s up, some guaranties) with eight fixed ip addresses (in the configuration .72 to .79). To hook up our network to the internet, we are using a cisco 892 router.I am new t...
The config is below. I'm trying to figure out why what I listed in the title of this thread is happening. If anyone has input to share that might help solve this issue, by all means I implore you to contribute. This particular switch blew smoke yeste...
Resolved! STP problem in vlans
hi guys i have a strange problem i have two cisco 3850 stack switches and add all vlans on it when i use "show spanning-tree summary" command, just 128 vlan shown and when i use "sho run | s vlan" displays: no spanning-tree vlan 1138-1243,1245-1467...
Hello! Is it posible to add 8 QSFP in one LACP chanel? I have 6509 VPS and NEXUS 9000 VPC and want to connect int by 8 QSFP, but I have only 4 up and 4 hot standby. Is it posible to make all up?
Resolved! LACP load balancing traffic Question
Hello guys, I have 2 3750 stacked core switches, which are connected through Port Channels to another Switch SG550x.The port channels are Up and running with LACP. Now my question is if Load Balancing between the link is working correctly. Basically ...
Hi, Its not clear to me reading the datasheet for the 3650 whether PoE+ is support on some or all ports when using the DC power supplies (PWR-C2-640WDC). This is in regards to both the 24 and 48 port models (ex: WS-C3650-48PS and WS-C3650-24PS) Can...
We are having EOL WS-C3560G-24TS-S switch and looking suggestion to purchase a new device. I have suggested a WS-C3650-24TD-S latest device. WS-C3650-24TD-S Fixed Uplinks : 2 x 10 Gigabit Ethernet with SFP+ and 2 x 1 Gigabit Ethernet with SFP Note :...
hi,i would like to use PWR-C2-250WAC as secondary PSU for a 3650 switch.the switch will have no PoE endpoints.can anyone confirm the said PSU is compatible to be used as secondary power. see table 3 from below link:https://www.cisco.com/c/en/us/produ...
