Hi
I have a cisco 877 connected to a DSL line. The line seems to drop out occasionally. I believe that the router may well be near the max distance from the RIM but I was wondering if there was anything I could do to reduce the chance of the line dropping out. The show dsl interface atm 0 show the following
Noise Margin:0.0dB 17.0 dB
Output Power:12.0dBm 2.5 dBm
Attenuation:35.0dB 12.5 dB
My atm interface is configured as follows
interface ATM0
no ip address
no atm ilmi-keepalive
pvc 8/35
encapsulation aal5mux ppp dialer
dialer pool-member 1
!
dsl operating-mode auto
Any suggestions would be greatly appreciated!