Is there any Muxponder of NCS 1000 series that support 32G/16G FC?

[duytoannguyen]

I'm planning to design a DCI link with 32G/16G FC, 10 GE, 40GE clients. I will use NCS 1001 + 1002 (or 1004) shelves but I don't know if there is a Muxponder support 32G/16G FC clients. Please let me know about this.

Thanks!

[marce1000]

 - Ref : https://www.cisco.com/c/en/us/td/docs/optical/ncs1000/77x/release/notes/b-ncs1000series-771-release-notes.html
 >...

FC Mode Support on DP04CFP2-M25-K9 Pluggable

The 16G FC and 32G FC muxponder modes support is added to the trunk pluggable DP04CFP2-M25-K9 on the OTN-XP card. This is in addition to the 4x100 muxponder and 400G-TXP modes that were supported previously.

 M.

[duytoannguyen]

Thank you for answering.

It seems that I will not be able to use NCS1002 in this case.

I have another question. Can I mix 32G/16G FC, 10 GE, 40GE clients in a NCS 1004 shelf?

[duytoannguyen]

I mean can I mux/demux 32G/16G FC, 10 GE, 40GE clients into a wavelength in a NCS 1004 shelf?

[marce1000]

              - Note sure on that ,  you may want to query Cisco through TAC  , 

 M.

[duytoannguyen]

Thanks again!