I have setup the following commands on cisco WS-C2960X-48LPS-L :
interface GigabitEthernet2/0/35
switchport access vlan 29
switchport mode access
snmp trap mac-notification change added
snmp trap mac-notification change removed
spanning-tree portfast
snmp-server community public RO
snmp-server community pr1vat3 RW
snmp-server trap link ietf
snmp-server trap timeout 5
snmp-server enable traps snmp linkdown linkup
snmp-server enable traps entity
snmp-server enable traps bridge newroot topologychange
snmp-server enable traps mac-notification change move threshold
snmp-server enable traps vlan-membership
snmp-server host XX.XX.XX.XX version 2c testtrap mac-notification snmp
mac address-table notification change
mac address-table notification threshold
What is expected in reverse is to get the MAC changes on port Gi 2/0/35 , link status and etc.
For an unknown reason we don't receive the required information.
Could someone knows what might is causing the issue?
