05-16-2023 04:28 AM
I am setting up a new ISE 3.1. deployment and I want to create a device group just for F5 devices.
From reading the docs it seems I should be able to select the device profile for F5 but I don't see that as an option:
Is there a way to create a device profile or a better way to divide devices into groups based on type (manufacturer etc).
Thanks
Solved! Go to Solution.
05-16-2023 03:59 PM
You don't need a Network Device Profile for the F5 if you're using TACACS+ for Device Admin.
See a similar discussion here:
https://community.cisco.com/t5/network-access-control/ise-2-x-need-a-device-profile-for-f5-in-ise-as-a-nad/td-p/3585068
05-16-2023 03:59 PM
You don't need a Network Device Profile for the F5 if you're using TACACS+ for Device Admin.
See a similar discussion here:
https://community.cisco.com/t5/network-access-control/ise-2-x-need-a-device-profile-for-f5-in-ise-as-a-nad/td-p/3585068
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide