I have a client that has 6 public IP addresses. He needs to use 3 of them. One for workstations which is currently working fine. It is using the default gateway IP. One for a email/web server which has a statis NAT and is also working fine. B...
I have a client that has 6 public IP addresses. He needs to use 3 of them. One for workstations which is currently working fine. It is using the default gateway IP. One for a email/web server which has a statis NAT and is also working fine. But ...
I have a client we deployed a UC560 system. Everythign was working but now the MWI lights stopped working. I have checked everything I can think of but I can not get them to light up. Any ideas would be helpful.I have attached a config. Below ...
I need some thoughts and or ideas. We deployed a new UC500 system for a client. They have 5 siteswith MPLS links between all. We are deploying phones in al location but only one call manager. The calls all work and route properly to the main l...
I have a client we deployed a UC560 system. Everythign was working but now the MWI lights stopped working. I have checked everything I can think of but I can not get them to light up. Any ideas would be helpful.I have attached a config. Below is ...
This might work but for us MSPs with many clients it is not a scalable or managable solution. I also have to be concerned that I get charged for each admin account. So say I have 10 Engineers with 100 clients. It is 100 logins and I am paying for ...
Hi,
I know this is very old but I am having the same issue. I wonder if anyone can help. I have tried all three methods. I can dial the MWI number and the ext and light and unlight the phone, but the trace doesn't show the sip number including t...
I know this is very old, but I have this issue. Anyone have any details on how to do this or enable I think the USB ports?
Getting this error: LKEM has been detected but diabled.
Thanks
Todd
No I cannot. when I run this commandip nat inside source list Workstation_B x.x.94.122 overloadI can only do ip nat inside source list Workstation_B and then I need to do interface or pool?The config looks clsoe but I also need the workstation_B to ...
Here is what I tried but I don’t think the 10.0.0.2 - 4 is working?ip nat pool VoIP x.x.94.124 x.x.94.124 netmask 255.255.255.248 type rotaryip nat inside source list VoIP pool VoIP overloadip nat inside source route-map SDM_RMAP_1 interface FastEthe...
