About dannypuckett

dannypuckett · 09-13-2018

I am curious if DUO works using a PcoIP Zero Client with the 6.X firmware authenticating to AWS Workspaces. The 6.X built in workspaces client has the MFA input box on the same screen as the AD authentication. I assume this would require the passco...

dannypuckett · 04-09-2010

A couple of days ago we switched telco profiders from AT&T to TW Telecom. We had no issues with AT&T but have a very specific one with TW Telecom. One of the numbers we dial is being dropped with a fast busy by the called party switch. They stated th...

dannypuckett · 12-28-2009

I have been having a hard time getting a site-to-site VPN setup with a Dynamic Address on IOS to Static Address on ASA. I have followed the example found here. http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a...

dannypuckett · 04-15-2009

I have a 7971 connected to a UC520 and it gets stuck in a boot loop. I did a factory reset with both 123456789*0# and 3491672850*# and it does a successful reload from the tftp service but after that it still gets stuck in a boot loop where it flashe...

dannypuckett · 04-08-2009

I recently replaced my home 1721 running 12.4(3g) with a demo UC520 running 12.4(11r)XW from work to become more familiar with it. I had my 1721 setup for PPTP dial-in with RADIUS authentication back to an SBS 2008 and everything worked great. When I...

dannypuckett · 04-12-2010

Ok, I have made the changes you suggested by adding a pots dial-peer for that specific number. It appears that the plan and type are being sent but the call is still being dropped with a fast busy. Not sure what to check from here.101859: .Apr 12 10:...

dannypuckett · 04-09-2010

Thanks for the response.The technicial who configured this originally has left the company and I have inherited it by default so Iam still very much learning as I go. Here is the rest of my config including pots peers. I noticethat 'dial peer voice 1...

dannypuckett · 04-16-2009

I got in this morning and the phone was up and running. What ever it was doing for several hours finally finished.

dannypuckett · 04-16-2009

I checked the tftp events and all files were found. This is on a default install of UC520 using the 7.0.2 package. I have not changed anything with the config other than the initial setup.

dannypuckett · 03-19-2009

I found an old post saying to enable ip proxy-arp on the internal interface and everything is working now.

Member Since	‎09-09-2005 12:11 PM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	19

User Statistics

User Activity

AWS Workspaces with Zero Client 6.X Firmware

Outbound call dropped for a specific number.

Site to Site Dynamic IOS to Static ASA

7971 boot loop

nas-port and nas-port-type

Re: Outbound call dropped for a specific number.

Re: Outbound call dropped for a specific number.

Re: 7971 boot loop

Re: 7971 boot loop

Re: Using cisco as PPTP Server