About Exonix1

Exonix1 · 04-24-2023

Hello all, we are implementing DUO MFA für CheckPoint 80.40 (we can’t upgrade to the last version right now). In our test environment everything works good, but in the production environment we faced an issue: even after connection was Approved in DU...

Exonix1 · 10-16-2018

Hello, I would like to configure the Pleasant Password server for 2FA. On its site is described that it uses the RADIUS authentication. I have added the RADIUS App in our DUO Admin panel. Here is the configuration file: [radius_client] host=10.255.9....

Exonix1 · 12-20-2017

Hi, currently we are using MS RRAS VPN but we are going replace it to Cisco ASA 5510-X with Cisco AnyConnect. I would like to know whether I have right understood the authentication process. I have the following schema: VPN client connects to Cisco ...

Exonix1 · 11-11-2016

Hi, i deployed Duo for the RRAS. Works very well with L2TP\IPSec VPN. But, SSTP VPN doesn’t work. A user can connect only for 1 sec and disconnect immediately. On NPS server (Windows Radius) i see successful authentication. On Duo Proxy server i see ...

Exonix1 · 10-20-2016

Hi, We are using MS VPN. But unfortunately it doesn’t support Passcodes with encrypted passwords (MSCHAPv2). Now we a looking other SSL VPN solutions, that are supporting the Passcodes. Which hardware VPN could you recommended? Cisco Juniper Palo Alt...

Exonix1 · 05-22-2023

Hello all, the problem was on the CheckPoint: CheckPoint was sending request from incorrect interface. After fixing this issue (with setting a static route) everything works as expected Thank you!

Exonix1 · 10-25-2018

Hello, accidentally I have known that the window with the Token request is useless. You can type there anything you want even wrong characters. The real 2FA goes via Push Notification only. Thank you for your help!

Exonix1 · 10-19-2018

Yes, firstly I provide my password and then the Password Manager Client asks me for the token: Having entered the token I get Duo Push notification. If I don’t enter the Token - I don’t get any DUO Push notification and I can’t log in. If I try to e...

Exonix1 · 10-18-2018

Thank you so much, Kristina! Now it works but after entering my password I had to type the Token and then approve the Duo Push… it is ok? Can I use Token only? Actually, it is not a problem, but… Also, I don’t see the remote IP… 2018-10-18T18:25:05+...

Exonix1 · 10-18-2018

Is it correct config? [duo_only_client] [radius_server_auto] ikey=*********** skey=************** api_host=********* radius_ip_1=10.255.9.13 radius_secret_1=123456 failmode=safe client=radius_client pass_through_all=true allow_concat=true port=1812 ...

Member Since	‎10-07-2016 12:52 AM
Date Last Visited	‎07-15-2023 02:13 AM
Posts	25
Total Helpful Votes Received	1

User Statistics

User Activity

CheckPoint denies connection even after Push Approval

Pleasant Password server

Cisco SSL VPN + AD RADIUS authentication

SSTP and DUO: certificate error

VPN and two-factor authentication

Re: CheckPoint denies connection even after Push Approval

Re: Pleasant Password server

Re: Pleasant Password server

Re: Pleasant Password server

Re: Pleasant Password server