Voice Systems and Accessories - Small Business

The previous thread on getting my VPN working between the UC540 and the SPA525G2 for a remote phone did the trick (thanks!).My problem now is that my SPA525G2 phone keeps rebooting.  It started as soon as I got the VPN working.  It starts up and says...

Hi Guys.... I have SPA3102 configured to SIP provider Callcentric.com. My SPA is with latest Firmware. There is NO problem to make calls between SIP numbers (callcentric generated numbers). However I have configure the Line port of the SPA3102 is to ...

Hi, I just received a BE6KS with Cisco pre-configured images. ESXi is already installed and VM are already deploy and ready to start. The issue is actually the UCS-E160D m2 have 3 Hard Drive, and no RAID was configured by Cisco. The VM and OVA are on...

Hi,I've found problem executing new version of SPC complier for linux. Old version (7.5.6) is working fine but when I'm trying to execute I've got an error:"cannot execute binary file"Problem is with ALL 7.5.7 spc compilers:spa50x-30x-sccp-7-5-7-spc-...

I have a customer that is using a 2 Line Cisco SPA112 ATA with the following dial plan for a small business VOIP solution: (<:1414>[2-4]xxxxxxS0|*xx|1[2-9]xx[2-9]xxxxxx) The customer claims that sometimes he is able to dial a number without the "1-...

Just changed router to a BT business hub5 and therefore needed to use SPA 112 adapter to use a voip telephone line for a brother all in one fax machine. The fax machine can dial out and send faxes but cannot receive. Does anyone know what adjustments...

Hi - I sent emails to Cisco last year trying to find out how I go about getting an SMB Cisco rep to submit a CSR for me. I submitted my question to ciscosb-certadmin@cisco.com in September 2015 and got a response from 'Joe <jvallada@cisco.com>' a mon...

i have more than 300 SPA 504G Phones and i would like to change 1 or 2 parameter for all these phones mainly i want to change from UDP to TLS and to remove some tones . so i know i can import the spacfg.xml then edit it and then sync it back  and i c...

I have an SPA 112 that is locking up, after a few days I can't even get IP connectivity to it.  It has 1.3.5(004p) firmware on it.  Anybody else having issues with this?

I have an SPA 112 that is locking up, after a few days I can't even get IP connectivity to it.  It has 1.3.5(004p) firmware on it.  Anybody else having issues with this?

I have many BE6K installs which are deployed in remote sites, can i use PCD to install CUCM cluster, CUC and CUP remotely? Any recomendation? Thanks Justin