Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
2,000 results
Sorted by:
Created by
Mohammad Ramadan A.Hafiez
in Unified Computing System Discussions
05-06-2024
04:38 AM
05-06-2024
04:38 AM
Hello Bros' I have a question regarding Cisco UCS system with specs as mentioned below: UCS manager 3.1(3b) Chassis 5108 Ucs FI 6248up IO module 2208xp Due to creticality I wanted to consult yo...
Labels:
Created by
r.heitmann
in Unified Computing System Discussions
01-05-2024
05:20 AM
01-05-2024
05:20 AM
I just wanted to clean up
* decommissioned
and
* physically removed
blade servers by
* selecting one and pressing ["Delete"] at the bottom as usual
from the inventory.
But UCSM...
Labels:
- Labels:
-
UCS Manager
Created by
voip7372
in Unified Computing System Discussions
05-13-2024
07:34 AM
05-13-2024
07:34 AM
We have a UCS C240 M4SX that is out of coverage now (no contract) though the plan is to replace this with a new server, but for now we're stuck with it. The problem is, virtual disk 0 is down be...
Labels:
- Labels:
-
Unified Communications
Created by
alisakhi029
in Unified Computing System Discussions
05-13-2024
11:56 AM
05-13-2024
11:56 AM
I have Cisco UCS 5108 and trying to install Cisco UCS 6324 Fabric Interconnect for the configuration purposes. I can't boot it normally. it's give ma message of non-supported.
Labels:
- Labels:
-
UCS Networking and Storage
Created by
Rosco.
in Unified Computing System Discussions
05-06-2024
06:06 PM
05-06-2024
06:06 PM
Ive a pair of new UCS-FI-6536s and they are all set up and working fine in IMM but we cannot SSH to them as we did on the old FIs. They are on the same VLAN as the old FIs and there are no fire...
Labels:
- Labels:
-
UCS Networking and Storage
Created by
ciscoucs
in Unified Computing System Discussions
04-21-2024
08:35 PM
04-21-2024
08:35 PM
Cisco Fabric Interconnect is having some Pmon Services as failed
==================================================
FI-B(local-mgmt)# show pmon state
SERVICE NAME STATE RETRY(MAX) EXITCODE SIGN...
Labels:
- Labels:
-
Unified Computing System (UCS)
Created by
sacapano
in Unified Computing System Discussions
04-19-2024
11:48 PM
04-19-2024
11:48 PM
hi we are trying to upgrade at least to 4.1(3n) , I would like to know what would be the latest stable version that you recommend and what is the upgrade path for our current releases (4.0(1a) , 4.0(...
Labels:
Created by
Daniel Andryszak
in Unified Computing System Discussions
04-15-2024
11:46 AM
04-15-2024
11:46 AM
I have a B200 M5 blade that is physically stuck in the chassis. The release handle on the blade will not completely open and will not release the device. Any suggestion on how to remove it? ...
Labels:
- Labels:
-
Unified Computing System (UCS)
Created by
mklas
in Unified Computing System Discussions
02-17-2021
12:26 PM
02-17-2021
12:26 PM
Hello, we are performing a staging and firmware updates on a bunch of C220 M5 standalone servers delivered with CIMC 4.1(2a) loaded. After initial CIMC setup we are able to connect to CIMC GUI, all ...
Labels:
- Labels:
-
Unified Computing System (UCS)
Created by
irguazo
in Unified Computing System Discussions
04-02-2024
12:59 PM
04-02-2024
12:59 PM
I have an environment with two FI 6248, two UCS 5108 and two 6510 brocade switches for san. UCSM has 4.0.4m version and FI are in "end host mode".
We have two service profiles in use (...
Labels:
- Labels:
-
Unified Computing System (UCS)