custom.ribbon_feed
취소
다음에 대한 결과 표시 
다음에 대한 검색 
다음을 의미합니까? 
cancel
164
VIEWS
0
Helpful
0
의견
socui
Cisco Employee
Cisco Employee
 
안녕하세요.
 
FTD 또는 FMC 문제를 해결할 때 각 서비스의 시작 상태를 확인하거나 문제를 격리하기 위해 서비스를 일시적으로 재시작, 중지 또는 시작해야 할 수 있으며, 이러한 경우 pmtool 기능이 사용됩니다.
아래 pmtool 의 일반적인 사용 방법에 대해 설명해드릴 예정입니다.
 
A)  root 에서 실행방법 (FTD/FMC)
 
a-1) CLISH 에서 expert 실행
       > expert
 
a-2) "sudo su -" 실행하여 root mode 로 변환
        admin@firepower:~$ sudo su -
        Password:
        root@firepower:~# 
 
a-3) pmtool status 명령을 사용하여 서비스 상태 확인이 가능합니다. 하지만 출력량이 많으므로 하기 명령어를 사용하여 하는 것을 추천합니다.
FTD:
root@firepower:~# pmtool status | grep " - "
loggerd (system) - Running 12216
SFDataCorrelator (normal) - Running 12556
expire-session (normal) - Running 12557
TSS_Daemon (normal) - Running 12558
snapshot_manager (normal) - Running 12559
mysqld (system,gui,mysql) - Running 12217
httpsd (system,gui) - Waiting
idhttpsd (system,gui) - Waiting
sfmb (normal) - Running 12224
sftunnel (system) - Running 12225
sfmgr (system) - Running 12227
sfmbservice (normal) - Running 12228
fpcollect (normal) - Running 12549
Syncd (normal) - Running 12550
Pruner (normal) - Running 12551
ReconcileState (system) - Running 12229
ActionQueueScrape (system) - Running 12552
rotate_stats (normal) - Running 12553
run_hm (normal) - Running 12230
sfestreamer (normal) - Waiting
sfipproxy (normal) - Running 12231
sftop (normal) - Running 12232
core-compressor (normal) - Waiting
detectionhealthd (normal) - Running 12233
rrd_server (normal) - Running 12234
snmpd (normal) - Waiting
sfhassd (normal) - Running 12235
diskmanager (normal) - Running 12236
adi (normal) - Running 12237
adi_proxy (normal) - Waiting
bltd (normal) - Running 12238
pdts_proc (system) - Running 12239
ndmain (normal) - Running 12240
ndclientd (normal) - Running 12241
logmonitor (normal) - Running 12242
sfifdmonitor (normal) - Running 12243
ngfwManager (normal) - Running 65319
ASAConfig (normal) - Running 14107
tomcat (normal) - Waiting
CloudAgent (system) - Waiting
beakerd (system) - Waiting
stunnel (normal) - Waiting
UEChanneld (normal) - Waiting
SSEConnector (system) - Waiting
rsyncd (normal) - Waiting
dhcpd (normal) - Waiting
EventHandler (normal) - Running 12554
vaultApp (system) - Waiting
hmdaemon (normal) - Running 14108
rdnssd (normal) - Waiting
lina (system) - Running 12244
srt (system) - Waiting
cgroup_monitor (normal) - Running 12246
service_monitor (system) - Waiting
b5858c54-c0ce-11ee-9679-f574aa26c4b3 (de,snort) - Running 57965
 
FMC:
root@FMC4600:~# pmtool status | grep " - "
SFDataCorrelator (normal) - Running 8649
CloudAgent (system) - Running 12765
beakerd (system) - Running 13323
UIMP (normal) - Running 7730
SFDCNotificationd (normal) - Running 5616
TSS_Daemon (normal) - Running 7732
HostInput_Daemon (normal) - Waiting
mysqld (system,gui,mysql) - Running 5790
monetdb (system,gui) - Running 6710
MonetDB_Monitor (system) - Running 39221
httpsd (system,gui) - Running 6717
cgroup_monitor (system) - Running 6719
sshd_monitor (normal) - Running 6761
DCCSM (system,gui) - Running 6763
RabbitMQ (normal) - Running 6765
MessageService (normal) - Running 7758
Tomcat (system,gui) - Running 7760
VmsBackendServer (system,gui) - Running 7973
CSMEventServer (system) - Running 8228
sfmb (normal) - Running 7016
sftunnel (system) - Running 25097
sfmgr (system) - Running 25098
sfmbservice (normal) - Running 25101
sfestreamer (normal) - Running 25864
estreamer-sftunnel (normal) - Running 25103
SFRemediateD (normal) - Running 7078
fpcollect (normal) - Running 7080
ntpd (normal) - Running 7082
Syncd (normal) - Running 7084
expire-session (normal) - Running 7086
Pruner (normal) - Running 7088
ReconcileState (system) - Running 7090
fireamp (normal) - Waiting
stunnel (normal) - Running 13203
ActionQueueScrape (system) - Running 7092
PerlMessageHandler (system) - Running 7094
run_hm (normal) - Running 7096
update_snort_attrib_table (normal) - Running 7099
snapshot_manager (normal) - Running 7102
SFNotificationd (normal) - Running 7107
SFTop10Cacher (normal) - Running 8230
sfipmid (normal) - Running 8232
sfipproxy (normal) - Running 25105
sftop (normal) - Running 8236
sfiotop (normal) - Running 8238
core-compressor (normal) - Running 8240
rrd_server (normal) - Running 8242
snmpd (normal) - Running 4526
vjdbc (normal) - Waiting
query_scheduler (normal) - Running 8244
diskmanager (normal) - Running 8246
diskmonitor (normal) - Running 8248
sla (normal) - Running 8651
adi (normal) - Running 9961
Seshat (normal) - Running 9756
Eventds (normal) - Running 9963
memcached (normal) - Running 9965
mojo_server (system,gui) - Running 9967
mongo (system) - Running 9969
redis (system) - Running 10720
tid (normal) - Running 10913
SSEConnector (system) - Running 25862
TelemetryApp (system) - Running 2664
auth-daemon (system) - Running 25964
CSDApp (system) - Waiting
VaultApp (system) - Running 9978
Prometheus (system) - Running 10708
hms (normal) - Running 10710
hmdaemon (normal) - Running 10712
dockerd (system) - Running 10715
rdnssd (normal) - Running 11110
EventHandler (normal) - Waiting
logmonitor (normal) - Running 10884
datadog-agent (normal) - Waiting
datadog-process-agent (normal) - Waiting
datadog-system-probe (normal) - Waiting
osquery (normal) - Waiting
monitor_interface_speed (normal) - Waiting
populate_ipmi_snmp_data (normal) - Running 10886
sfsnmp_fmc (normal) - Running 10888
sspos_snmp_subagentd (normal) - Running 4528
ssp_snmp_trap_fwdr (normal) - Running 4530
upg_workflow_robot (system) - Waiting
rsyncd (normal) - Waiting
csdac (normal) - Waiting
 
a-4) Waiting 상태의 서비스를 확인하려면 아래 명령어를 실행하여 확인 가능합니다.
FTD:
root@firepower:~# pmtool status | grep -i "waiting"
httpsd (system,gui) - Waiting
idhttpsd (system,gui) - Waiting
sfestreamer (normal) - Waiting
core-compressor (normal) - Waiting
snmpd (normal) - Waiting
adi_proxy (normal) - Waiting
tomcat (normal) - Waiting
CloudAgent (system) - Waiting
beakerd (system) - Waiting
stunnel (normal) - Waiting
UEChanneld (normal) - Waiting
SSEConnector (system) - Waiting
rsyncd (normal) - Waiting
dhcpd (normal) - Waiting
vaultApp (system) - Waiting
rdnssd (normal) - Waiting
srt (system) - Waiting
service_monitor (system) – Waiting
 
FMC:
root@fmc:~# pmtool status | grep -i "waiting"
HostInput_Daemon (normal) - Waiting
fireamp (normal) - Waiting
vjdbc (normal) - Waiting
CSDApp (system) - Waiting
EventHandler (normal) - Waiting
datadog-agent (normal) - Waiting
datadog-process-agent (normal) - Waiting
datadog-system-probe (normal) - Waiting
osquery (normal) - Waiting
monitor_interface_speed (normal) - Waiting
upg_workflow_robot (system) - Waiting
rsyncd (normal) - Waiting
csdac (normal) - Waiting
 
a-5) Running 상태가 아닌 서비스를 확인할 경우 하기 명령어를 실행하여 확인 가능합니다.
FTD:
root@firepower:~# pmtool status | grep " - " | grep -i -v "running"
httpsd (system,gui) - Waiting
idhttpsd (system,gui) - Waiting
sfestreamer (normal) - Waiting
core-compressor (normal) - Waiting
snmpd (normal) - Waiting
adi_proxy (normal) - Waiting
tomcat (normal) - Waiting
CloudAgent (system) - Waiting
beakerd (system) - Waiting
stunnel (normal) - Waiting
UEChanneld (normal) - Waiting
SSEConnector (system) - Waiting
rsyncd (normal) - Waiting
dhcpd (normal) - Waiting
vaultApp (system) - Waiting
rdnssd (normal) - Waiting
srt (system) - Waiting
service_monitor (system) – Waiting
 
FMC:
root@FMC4600:~# pmtool status | grep " - " | grep -i -v "running"
HostInput_Daemon (normal) - Waiting
fireamp (normal) - Waiting
vjdbc (normal) - Waiting
CSDApp (system) - Waiting
EventHandler (normal) - Waiting
datadog-agent (normal) - Waiting
datadog-process-agent (normal) - Waiting
datadog-system-probe (normal) - Waiting
osquery (normal) - Waiting
monitor_interface_speed (normal) - Waiting
upg_workflow_robot (system) - Waiting
rsyncd (normal) - Waiting
csdac (normal) - Waiting
 
a-6) GUI 서비스를 확인할 경우 하기 명령어를 실행하여 확인 가능합니다.
FTD:
root@firepower:~# pmtool status | grep -i "gui"                       
mysqld (system,gui,mysql) - Running 12217
httpsd (system,gui) - Waiting
idhttpsd (system,gui) – Waiting
 
FMC:
root@fmc:~# pmtool status | grep "gui"
mysqld (system,gui,mysql) - Running 8277
monetdb (system,gui) - Running 8441
httpsd (system,gui) - Running 8448
DCCSM (system,gui) - Running 8453
Tomcat (system,gui) - Running 9857
VmsBackendServer (system,gui) - Running 10015
mojo_server (system,gui) - Running 10767
 
a-7) Snort 서비스를 확인할 경우 하기 명령어를 실행하여 확인 가능합니다.
FTD:
root@firepower:~# pmtool status | grep " - " | grep -i "snort"    
b5858c54-c0ce-11ee-9679-f574aa26c4b3 (de,snort) - Running 57965
 
a-8) 서비스가 Waiting 상태로 지속이 되고 Running 상태로 변하지 않을 경우 해당 서비스를 재시작하여 상태 확인가능합니다. 
예를 들면 SFDataCorrelator 서비스를 재시작 할 경우 하기 명령으로 실행합니다.
root@firepower:~# pmtool RestartByID SFDataCorrelator
 
a-9) 특정 서비스 정지 및 재 시작이 필요할 경우 하기 명령으로 실행합니다.
root@firepower:~# pmtool DisableByID SFDataCorrelator
root@firepower:~# pmtool EnableByID SFDataCorrelator
 
예:
root@firepower:~# pmtool status | grep -i "SFDataCorrelator"
SFDataCorrelator (normal) - Running 14866
Command: /ngfw/usr/local/sf/bin/SFDataCorrelator --nodaemon
PID File: /ngfw/var/sf/run/SFDataCorrelator.pid
Enable File: /ngfw/etc/sf/SFDataCorrelator.run
CGroups: memory=System/SFDataCorrelator(enrolled)
Required by: SFDataCorrelator,expire-session,TSS_Daemon,snapshot_manager,fpcollect,Syncd,Pruner,ActionQueueScrape,rotate_stats,sfestreamer,tomcat,EventHandler
 
root@firepower:~# pmtool DisableByID SFDataCorrelator
 
root@firepower:~# pmtool status | grep -i "SFDataCorrelator"
SFDataCorrelator (normal) - User Disabled
Command: /ngfw/usr/local/sf/bin/SFDataCorrelator --nodaemon
PID File: /ngfw/var/sf/run/SFDataCorrelator.pid
Enable File: /ngfw/etc/sf/SFDataCorrelator.run
CGroups: memory=System/SFDataCorrelator
Required by: SFDataCorrelator,expire-session,TSS_Daemon,snapshot_manager,fpcollect,Syncd,Pruner,ActionQueueScrape,rotate_stats,sfestreamer,tomcat,EventHandler
 
root@firepower:~# pmtool EnableByID SFDataCorrelator
 
root@firepower:~# pmtool status | grep -i "SFDataCorrelator"
SFDataCorrelator (normal) - Running 29691
Command: /ngfw/usr/local/sf/bin/SFDataCorrelator --nodaemon
PID File: /ngfw/var/sf/run/SFDataCorrelator.pid
Enable File: /ngfw/etc/sf/SFDataCorrelator.run
CGroups: memory=System/SFDataCorrelator(enrolled)
Required by: SFDataCorrelator,expire-session,TSS_Daemon,snapshot_manager,fpcollect,Syncd,Pruner,ActionQueueScrape,rotate_stats,sfestreamer,tomcat,EventHandler
 
b) CLISH 에서 실행(FTD)
> pmtool ?
  checkdestatus      pmtool checkdestatus
  criticalstatus     pmtool criticalstatus
  disablebyid        pmtool disablebyid
  disablebytype      pmtool disablebytype
  disabledechanges   pmtool disabledechanges
  enablebyid         pmtool enablebyid
  enablebytype       pmtool enablebytype
  enabledechanges    pmtool enabledechanges
  hupbyid            pmtool hupbyid
  hupbytype          pmtool hupbytype
  processhealth      pmtool processhealth
  reconfigalleps     pmtool reconfigalleps
  reconfigdetection  pmtool reconfigdetection
  reconfigepsforde   pmtool reconfigepsforde
  restartbyid        pmtool restartbyid
  restartbytype      pmtool restartbytype
  show               pmtool show
  status             pmtool status
  stopdesnofo        pmtool stopdesnofo
  write              pmtool write
 
감사합니다.
시작하기

상단의 검색창에 키워드, 문구, 또는 질문을 입력하여 궁금한 내용을 찾아보세요.

이곳에서의 여러분의 여정이 훌륭하기를 바랍니다! 시스코 커뮤니티에 빠르게 익숙해지는 데 도움이 되는 몇 가지 링크를 준비했습니다.

빠른 링크